Assembling - Mopedia RP515 Manual De Instrucciones

9.2 Assembling

A
G
H
D
E
F
L
Front
RP515
FIG. 3 (Pictures with illustrative purpose only)
Assembled Rollator
A - Handgrips
B - Adjustable Handlebars
C - Star Knob
D - Padded Backrest
E - Backrest Push Buttons
F - Padded Seat
1. Unfold the rollator by pushing down on the Folding Bracket (I) until the Frame is in full
extension.
2. Insert the padded backrest (D) so that the padded portion faces the front of the unit.
Push down on the backrest while depressing the the round plastic push button until it
snaps into place.
3. Insert the handlebars (B) so that the handgrips (A) are aligned with the rear wheels.
The brake cables should be on the outside of the handlebars and frame. Ensure excess
brake cable loops towards the front of the rollator.
FIG. 4 (Picture with illustrative purpose only)
B
C
Rear
I
K
Front
J
RP538
G - Brake Lock
H - Brake Cables
J - Front Wheels
K - Back Wheels
L - Bag/basket
4. Adjust the height of the handlebars (B) for proper fit. To
determine proper height, stand upright behind the rollator
with shoulders relaxed, arms hanging at your side and eyes
looking straight ahead. Standing in this position, the
C
handgrips (A) of the rollator should be adjusted to a height
even with the wrists. This will position the arms at an
approximate 20º to 30º bend when using the rollator.
Secure the handlebars at the closest hole to the desired
height. Insert the screw from the inside of the rollator
through the frame. Attach the washer so it fits snuggly
against the frame. Secure the star knob to the screw. See
Figure 3. (Important: Hand Tighten Only!)
Rear
7