Iso Din Radio Provision With Pocket - Metra 99-8214 Manual Del Usuario

1. Locate the factory wiring harness in the dash.
Metra recommends using the proper mating
adapter from Metra or AXXESS. Re-connect the
negative battery terminal and test the radio for
proper operation.
2. Attach the corresponding radio housing bracket to
the radio housing using the included (4) #8 x 3/8"
Phillips truss head screws. (Figure A)
3. Mount the ISO brackets to the radio with the
screws supplied with the radio. (Figure B)
4. Slide the radio into the radio opening until the
side clips engage. (Figure C)
5. Snap the ISO trim plate into the radio housing.
(Figure C)
6. Secure the radio housing into the dash using the
factory hardware.
7. Reassemble dash in reverse order
of disassembly.

ISO DIN radio provision with pocket

(Figure A)
(Figure B)
99-8214
5
Right side clip
(Figure C)