1. Locate the factory wiring harness in the dash.
Metra recommends using the proper mating
adapter from Metra or AXXESS. Re-connect the
negative battery terminal and test the radio for
proper operation.
2. Attach the corresponding radio housing bracket to
the radio housing using the included (4) #8 x 3/8"
Phillips truss head screws. (Figure A)
3. Slide the DIN cage into the radio housing and
secure by bending the metal locking tabs down.
(Figure B)
4. Slide the aftermarket radio into the cage and
secure. (Figure C)
5. Secure the radio housing into the dash using the
factory hardware.
6. Reassemble dash in reverse order
of disassembly.
Kit Assembly 99-8214
DIN radio provision with pocket
(Figure A)
(Figure B)
4
(Figure C)