Avery Dennison PATHFINDER 6140 Referencia Rápida página 2

L o a d i n g S u p p l i e s
1.
Push the latch buttons to open the supply cover.
Latch
Button
2.
Spread the supply holder tabs apart so it adjusts to the size of your
supply roll and lock the supply holder in place.
3.
Place a roll of supply in the supply holder as shown.
4.
For non-peel mode, close the supply cover, make sure the printer is
on, then press Feed.
For peel mode, continue to step 5.
2-EN
Suppl y Holder
Suppl y Lock Tab