Reading Diagram; Laser Safety Compliance - Datalogic FireScan D111 Guía Rápida

READING DIAGRAM

300
200
0.12
100
mm
0
-100
-200
-300
mm
100
COMPLIANCE

LASER SAFETY COMPLIANCE

The laser scanner conforms to the applicable requirements of
both CDRH 21 CFR 1040 and EN60825-1 at the date of
manufacture.
The laser light is visible to the human
eye and is emitted from the window
indicated in the figure
Laser warning and classification label
.
For installation, use and maintenance,
it is not necessary to open the device.
CAUTION:
Use of controls or adjustments or performance of procedures
other than those specified herein may result in exposure to
hazardous visible laser light.
The laser scanner utilizes a low-power laser diode. Although
staring directly at the laser beam momentarily causes no known
biological damage, avoid staring at the beam as one would with
any very strong light source, such as the sun. Avoid that the
laser beam hits the eye of an observer, even through reflective
surfaces such as mirrors, etc.
Reading Zones (10° skew angle)
0.25
mm
0.19
mm
EAN
0.33 mm
200 300
.
0.50
mm
0.38
mm
400 500
1.00
mm
600 700 800 mm