Iso Din Radio Provision With Pocket - Metra 99-7581 Instrucciones De Instalación

ISO DIN radio provision with pocket

1. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
2. Secure the ISO DIN brackets to the radio
using screws supplied with the radio.
(Figure A)
3. Slide the radio into the radio housing
until it snaps into place. (Figure B)
4. Snap the ISO DIN trim plate onto the
front of the radio housing. (Figure B)
5. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio and climate controls. Metra
recommends using the proper mating
adapter from Metra or AXXESS. Test the
radio for proper operation.
6. Reassemble the dash in reverse order of
disassembly to complete the installation.
6
KIT ASSEMBLY
(Figure A) (Figure B)
|
386.257.1187 MetraOnline.com