Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Kia Sportage 2011-2016
99-7344G, 99-7344CH
KIT FEATURES
• ISO DIN radio provision with pocket
• Painted Gray or Charcoal to match factory finish
G = Gray, CH = Charcoal
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) Panel clips • E) (4) Phillips truss head screws
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-7304 • HYBL-03 (with NAV) • HYBL-04
Antenna Adapter: • Not required • 40-KI11 (with NAV)
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
METRA. The World's best kits.
Installation instructions for part 99-7344
C
D
metraonline.com
™
Table of Contents
Dash Disassembly ..................................................2
Kit Preparation ........................................................3
Kit Assembly
– ISO DIN radio provision with pocket ...................... 3
E
CAUTION!
All accessories, switches, climate controls panels, and
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
© COPYRIGHT 2004-2016 METRA ELECTRONICS CORPORATION
Publicidad
Manuales relacionados para Metra 99-7344G
Resumen de contenidos para Metra 99-7344G
- Página 1 Also, do not remove the factory radio with the key in the TOOLS REQUIRED on position, or while the vehicle is running. • Panel removal tool • Phillips screwdriver METRA. The World’s best kits. metraonline.com ™ © COPYRIGHT 2004-2016 METRA ELECTRONICS CORPORATION...
-
Página 2: Dash Disassembly
99-7344 Dash Disassembly 1. Remove the screw in the 4. Unscrew the 4 Phillips screws instrument panel to the right of securing the radio into the dash, the “engine start” button then unplug and remove the radio. unclip the top panel of the steering (Figure D) column then unclip and remove the 5. -
Página 3: Kit Preparation
4. Locate the factory wiring harness in the dash. Metra recommends using (Figure A) the proper mating adapter from Metra and/or AXXESS. Test the radio for proper operation. 5. Secure the completed assembly into the dash. (Figure A) 6. -
Página 4: Important
Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits. metraonline.com ™ © COPYRIGHT 2004-2016 METRA ELECTRONICS CORPORATION... -
Página 5: Características Del Kit
HERRAMIENTAS REQUERIDAS con el vehículo funcionando. • Herramienta para quitar paneles • Destornillador Phillips METRA. The World’s best kits. metraonline.com ™ © COPYRIGHT 2004-2016 METRA ELECTRONICS CORPORATION... -
Página 6: Desmontaje Del Tablero
99-7344 Desmontaje del tablero 1. Quite el tornillo del panel de 4. Desatornille los 4 tornillos Phillips instrumentos a la derecha del botón que sostienen el radio en el de “arranque de motor” y luego tablero, desconecte y quite el desenganche el panel de arriba radio. -
Página 7: Preparación Del Kit
4. Localice el arnés de cableado de fábrica en el tablero. Metra (Figura A) recomienda que use adaptadores adecuados de acoplamiento de Metra y/o de AXXESS. Pruebe el radio para verificar que funcione correctamente. -
Página 8: Importante
800-354-6782 para obtener más información y avance hacia un futuro mejor. Metra recomienda técnicos con certificación del Programa de Certificación en Electrónica Móvil (Mobile Electronics Certification Program, MECP). METRA. The World’s best kits. metraonline.com ™ © COPYRIGHT 2004-2016 METRA ELECTRONICS CORPORATION...