Microphone; Keypad Operations - Dynascan P-72 Manual De Instalación

The left side of the transceiver incorporates two jacks for speaker and microphone. Consult the
instructions of the accessories for installation.

5.4.2.- Microphone:

Connect the supplied microphone (with built-in speaker) to the RJ45 jack on the left side of the
front panel of the transceiver. Press the connector until you hear a "click" sound.

5.4.3.- Keypad operations:

Follow the operation of the keys described below to simplify the instructions and avoid unnecessary
duplication.
Instruction
Press the [XXX] key.
Press and hold the [XXX] key.
Press the [MENU] tuning knob + the [XXX]
[MENU] tuning knob.
Press and hold the [POWER] key.
key.
English - 10 -
Operation
Means briefly press the key.
Means press and hold the key for 3 seconds or
more.
Means briefly press the [MENU] knob, then
press and release the proper key to enter into
settings menu.
Select the set options.
Press and hold the [POWER] key for 3 seconds
or more to turn ON/OFF the transceiver.