Getting Acquainted; Front Panel - Dynascan P-72 Manual De Instalación

6.- GETTING ACQUAINTED:

6.1.- FRONTAL PANEL:
(1) [ON/OFF] key:
● Press and hold for 3 seconds to turn [ON/OFF] the transceiver.
(2) [CALL/C.IN] key:
● Press this key to call up the call channel of the currently operation (CTRL) band.
● In VFO mode, press and hold this key for more than 3 seconds to store the frequency of the
currently operation band (CTRL) as the calling cannel.
● In VFO mode, press the [MENU] knob, then [CALL/C.IN] key to turn ON/OFF the reverse
function of currently operation band (CTRL).
>> The reverse function is valid only when the offset frequency is set and offset direction (+,-) is
on.
● In channel operation mode (CH), press the [MENU] knob, then the [CALL/C.IN] key, the current
channel is locked. Repeat the procedure again to unlock the current channel.
(3) [VFO/MR] key:
● Press the [VFO/MR] key to select the working operation mode for the currently operation band
(CTRL).
>> Every time when [VFO/MR] key is pressed, the display and working mode is switched in:
Channel → Channel + Frequency → Channel + Name → VFO.
● In VFO operation mode, press and hold this key for more than 3 seconds to store the frequency of
the currently operation band (CTRL) as the calling channel.
● In Channel / Channel + Frequency / Channel + Name, press and hold this key for more than 3
seconds to edit the channel name of the currently operation band (CTRL).
(4) [VOL/SCAN] key:
● Press this key to set the volume level of the currently operation band (CTRL).
● Press the [VOL/SCAN] key twice to mute the transceiver. Press this key again to turn off the
mute mode.
English - 11 -