Clock Set Up - Sylvania 6727DG Manual Del Propietário

TV/DTV SECTION
OPTIONAL SETTINGS

CLOCK SET UP

TV
DTV
Set the unit clock correctly for VCR timer recording. We suggest that
you should set the clock manually when you first set up the unit, then
set the auto clock setting to "ON" to correct the time periodically.
NOTES:
• If you cannot receive a station with time signals, auto clock
setting is not available. Use manual setting only.
• You must use the remote control for the clock setting.
MANUAL CLOCK SETTING
In the example below, the clock is to be set to:
DATE:
SETTING TIME:
1
Press [SET-UP].
Use [K K / L L ] to select "SETTING CLOCK", then
press [ENTER].
2
Use [K K / L L ] to select
"MANUAL CLOCK SET", then
press [ENTER].
• If there is no local PBS station
in your area or on your cable
system, select "AUTO CLOCK" and press
[ENTER] to turn "OFF" the function before this
step.
3
Use [ K K / L L ] to set your
desired month, day, year, hour
and minute.
Use [s / B] to move to
another item.
4
Press [SET-UP].
Although seconds are not
displayed, they begin counting
from 0 when you press [SET-UP]. Use this feature to
synchronize the clock with the correct time.
NOTE:
• When unplugging the AC cord or if there is a power failure
for more than 3 seconds, you may have to reset the clock.
TO CHANGE CLOCK SETTING
1
Follow steps 1 to 2 above.
2
Select the item you want to change using [B B ].
3
Enter correct numbers using [
4
Press [SET-UP] to start the clock.
16
EN
VCR
May 5th, 2006
5:40PM
– SETTING CLOCK –
AUTO CLOCK [ON]
AUTO CLOCK CH SEARCH
AUTO CLOCK CH [ 02]
MANUAL CLOCK SET
B
D.S.T. [OFF]
TIME ZONE [OFF]
– MANUAL CLOCK SET –
MONTH DAY YEAR
05 / 05 FRI 2006
HOUR MINUTE
05 : 40 PM
5:40 PM
K K / L L ].
AUTOMATIC CLOCK SETTING
NOTES:
• If a cable converter box is being used, make sure it is turned on.
• You must use the remote control for the clock setting.
• If the unit is connected directly to a cable converter box or
satellite box, the local PBS station must be selected on the
cable box itself and the unit must be set to the output channel
of the cable converter box or satellite box (usually channel 3 or
4), to enable to set up or correct the clock automatically.
1
Press [SET-UP].
Use [K K / L L ] to select "SETTING CLOCK", then
press [ENTER].
2
Press [ENTER] to select "ON".
3
Press [L L ] to select
"AUTO CLOCK CH SEARCH".
Then press [ENTER].
• The unit begins searching for
the station which contains the
auto clock set signal. The
search for a signal may take
up to 20 seconds per channel.
• When the search has finished,
"_ _" appears at the lower left of the screen.
NOTES:
• During "AUTO CLOCK CH SEARCH", the picture may be distorted.
• If no number appears on the TV screen, there are no stations in
your area which contain the Auto Clock signal. Auto Clock Setting
is not possible. Please use Manual Clock Setting on this page.
4
Write down the numbers that appear on the screen.
They are the auto clock stations in your area.
5
Press [RETURN] to go back to
"SETTING CLOCK" menu.
Press [ L L ] to select
"AUTO CLOCK CH".
Use [s / B] until you locate
an auto clock station number.
6
Press [SET-UP] to exit the menu.
NOTE:
• Once the unit is turned off, it will periodically check and set
the correct date and time.
– SETTING CLOCK –
AUTO CLOCK [ON]
B
AUTO CLOCK CH SEARCH
AUTO CLOCK CH [ 02]
MANUAL CLOCK SET
D.S.T. [OFF]
TIME ZONE [OFF]
– SETTING CLOCK –
AUTO CLOCK [ON]
AUTO CLOCK CH SEARCH
B
AUTO CLOCK CH [ 02]
MANUAL CLOCK SET
D.S.T. [OFF]
TIME ZONE [OFF]
– AUTO CLOCK CH SEARCH –
08 10 13
– –
– SETTING CLOCK –
AUTO CLOCK [ON]
AUTO CLOCK CH SEARCH
B AUTO CLOCK CH [ 02]
MANUAL CLOCK SET
D.S.T. [OFF]
TIME ZONE [OFF]