Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ABOUT OVERLAP OF PROGRAMS
When programs overlap, a program may not be
recorded.
• The program with an earlier start has priority.
• Once the earliest program finishes, the overlapping pro-
grams will begin recording in sequence.
• When the starting time is the same, the program set on
the highest position in the program list has priority.
• The illustration below demonstrates the sequence of
recordings.
Recording Sequence
Program 1
10:00AM-11:00AM
Program 2
9:00AM-10:00AM
Program 3
9:30AM-12:00PM
9:00AM
*Recording period is SHADED
TIMER PROGRAM EXTENSION
You can shift the time schedule of an automatic timer
recording after programming or during recording.
1
Press [POWER] to turn on the unit.
2
Press [SET-UP].
Use [
K K
/
L L
] to select "TIMER PROGRAMMING",
then press [ENTER].
3
Press [REC] and use
[K K / L L ] to select the desired
program.
4
Press [REC] repeatedly until your desired
begin/end time appears.
Each press will shift forward the begin/end time
for recording by 10 minutes.
NOTES:
• When the recording is already in progress, each press will
shift forward the end time only.
• If you want to cancel while setting, press [PAUSE F F ] on the
remote control. The recording time returns to the original
time.
• When you shift forward the time schedule during recording,
the recording speed will be automatically set to the SLP
mode.
5
Press [ENTER] to complete the setting. Then
press [SET-UP] to exit the menu.
10:00AM
11:00AM
12:00PM
– TIMER PROGRAMMING –
CH
DATE
BEGIN
END
61
7
/
03
MON
7
:
30- -
PM
8
:
50- -
PM
B
- - - - - -
-
/
--
- - -
-
:
- -
- -
-
:
- -
- -
- - - - - -
-
/
--
- - -
-
:
- -
- -
-
:
- -
- -
- - - - - -
-
/
--
- - -
-
:
- -
- -
-
:
- -
- -
- - - - - -
-
/
--
- - -
-
:
- -
- -
-
:
- -
- -
TO CORRECT A PROGRAM AFTERWARD
1
Press [POWER] to turn on the unit.
2
Repeat steps 1 to 2 of "AUTOMATIC TIMER
RECORDING" on page 28.
3
Press [B B ] (or press [s s ] to go back one step)
until the part you want to correct begins flashing,
then use [
K K
/
L L
Press [ENTER] to confirm.
4
Press [POWER] to set automatic timer recording.
TO CANCEL A PROGRAM
1
Press [POWER] to turn on the unit.
2
If recording is in progress, press
[STOP/EJECT C A] on the unit.
3
Press [SET-UP].
Use [
K K
/
L L
] to select "TIMER PROGRAMMING",
then press [ENTER].
4
Use [
K K
/
L L
] to select a program you want to
cancel and press [CLEAR].
5
Press [SET-UP] to exit the menu.
SP
- -
- -
- -
- -
] to make the changes.
29
EN
EN
EN
Publicidad
Capítulos
Tabla de contenido
