Recording; Normal Recording; Otr (One Touch Recording) - Sylvania 6727DG Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

R
ECORDING
NOTES:
• Insert a cassette tape with its erase-prevention tab in place.
• This unit cannot record the contents from the built-in DVD.
• You can ONLY watch the same TV program that is being
recorded.

NORMAL RECORDING

VCR
1
Use [CH.
K K
/
L L
] or the Number
buttons to select the channel to
be recorded.
NOTE:
• If the unit is connected to a cable box or satellite box, the
unit must be on CH3 or CH4. Select the channel to be
recorded on the cable box or satellite box.
2
Press [SPEED] to select the
desired tape speed (SP/ SLP).
(Refer to "SELECTING TAPE
SPEEDS" on page 24.)
3
Press [REC] to start recording.
4
Press [PAUSE F F ] to tempo-
rarily stop recording unwanted
scenes.
Press [PAUSE F F ] again or
[REC] to resume recording.
NOTE:
• If the recording is paused for more than 5 minutes, the unit
will automatically switch to the recording mode to prevent
tape from damage.
5
Press [STOP C C ] to stop recording.

OTR (One Touch Recording)

This function enables you to start recording for
specified length simply by pressing [REC/OTR] on
the unit.
1
CH 10
NOTE:
• If the unit is connected to a cable box or satellite box, the
2
3
SP
REC
SP
Time(s)
PAUSE
17 times
SP
NOTES:
• If you press [REC/OTR] when "OTR (8:00)" is displayed,
• Even if you press [POWER] during OTR, the unit continues
• You cannot start OTR with the remote control.
• In the SLP mode, maximum recording time, assuming the
• If the tape runs out before the end time, the unit will switch
• To show the remaining time of OTR, press [DISPLAY] on
TO CANCEL OTR IN PROGRESS
Press [STOP/EJECT C A] on the unit or [STOP C C ].
VCR
Use [CH.
K K
/
L L
] or the Number buttons to
select the channel to be recorded.
unit must be on CH3 or CH4. Select the channel to be
recorded on the cable box or satellite box.
Press [SPEED] to select the desired tape speed
(SP/SLP).
(Refer to "SELECTING TAPE SPEEDS" on page 24.)
Press [REC/OTR] on the unit
repeatedly until your desired
length appears on the screen.
The recording time will increase
by 30 minutes up to 8 hours.
Recording starts immediately when you press
[REC/OTR].
Display
1 time
(normal recording)
2 times
0:30
3 times
1:00
8:00
the unit returns to the normal recording mode.

recording.

tape starts at the beginning, is 8 hours using T-160 (or 6
hours using T-120).
to the stop mode immediately, eject the tape and turn itself
off.
the remote control to display "OTR" on the TV screen. (It will
show up momentarily then disappear.)
OTR (2:30)
SP
Recording length
30 minutes
60 minutes
480 minutes
27
EN
EN
EN

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido