Vcr Section; Video Cassette; Selecting Tape Speeds; Erase Prevention - Sylvania 6727DG Manual Del Propietário

VCR SECTION

V
IDEO CASSETTE
This unit will operate with any cassette that has the
mark. For best results, we recommend the
use of high-quality tapes. Do not use poor quality or
damaged tapes.

SELECTING TAPE SPEEDS

Before recording, select the tape speed from : SP
mode (Standard Play) or SLP mode (Super Long
Play). You can also play a tape recorded in LP mode
(Long Play).
Tape Speed
Type of tape
SP mode 1 hour
SLP mode 3 hours
P
LAYBACK

BASIC PLAYBACK

VCR
1
Insert a pre-recorded tape so that
the unit turns on automatically
(Auto Power On).
2
Select TV/VCR mode by pressing [SELECT].
NOTE:
• If the erase-prevention tab has been removed, the unit will
change the VCR mode and starts playback automatically.
3
To start playback, press [PLAY B B ].
NOTE:
• Even in the DVD mode, you can start the VCR playback if
you press [PLAY B B ] on the control panel (of the TV/VCR
side).
4
To stop the playback, press [STOP C C ].
5
To rewind the tape, press [REVE].To forward
the tape, press [FWDD]. To stop winding, press
[STOP C C ].
6
To eject the tape from the unit,
press [STOP/EJECT C A]
on the control panel.
24
EN EN EN
Recording/Playback time
T60 T120 T160
2 hours 2-2/3 hours
6 hours 8 hours

ERASE PREVENTION

Break off the tab on the back
edge of the cassette to prevent
accidental erasing of recording.
Cover the hole with plastic tape to record on the tape again.
NOTES:
• In the TV/VCR mode, if the cassette without tab is inserted,
playback will start automatically.
• If you press [REC/OTR] or [REC] when a cassette without
tab is inserted, the unit will eject it automatically.
TRACKING ADJUSTMENT
• Tracking adjustment will be set automatically when
you start playback (Digital tracking function).
• If noise lines (black and white streaks) appear on
the playback picture, use [CH. K K / L L ] until the
streaks disappear (Manual tracking adjustment).
This is available in Pause/Still/Slow mode, too.
• To release manual tracking mode, stop the tape
once and start playback again.
STILL PICTURE
• During playback, press [PAUSE F] to freeze the
picture.
You can advance the picture frame by frame by
pressing [PAUSE F] repeatedly.
• To release the Still mode, press [PLAY B B ].
SLOW MOTION
• During playback, press [PAUSE F] then press
[FWDD].
• To release the Slow mode, press [PLAY B B ].
NOTE:
• If the unit keeps the slow mode or still mode for more than
5 minutes, it will automatically enter the stop mode.
Tab
Plastic Tape