Auto Return; Auto Rewind-Eject; Copying A Video Cassette (From Another Source) - Sylvania 6727DG Manual Del Propietário

VCR SECTION
RECORDING

AUTO RETURN

VCR
This function allows you to automatically search the
beginning of the recorded program(s) after timer
recording finishes.
1
Press [SET-UP].
Use [ K K / L L ] to point to "USER'S SET UP",
then press [ENTER].
2
Use [ K K / L L ] to point to
"AUTO RETURN", then press
[ENTER] to select "ON".
3
When all the timer recordings are completed, the
unit will rewind to the beginning of the recorded
program(s) and then turn itself off.
NOTE:
• If you turn off the unit while rewinding the tape, the AUTO
RETURN will stop.
TO CANCEL THE AUTO RETURN MODE
Repeat steps 1 to 2 and press [ENTER] to select
"OFF".
• Even if any power failure occurs, the unit will retain
its memory for this feature.

AUTO REWIND-EJECT

VCR
• When the end of a tape is reached during record-
ing, playback, or fast forward, the tape will auto-
matically rewind to the beginning. After rewinding
finishes, the unit will eject the tape and turn itself
off.
• This function is operative when REPEAT PLAY is
set to "OFF".
• The tape will not auto-rewind during timer record-
ing or One Touch Recording (OTR).
30
EN EN EN
COPYING A VIDEO CASSETTE
(from another source)
VCR
You can make copies of video tapes for your
enjoyment.
You CANNOT copy a DVD to a videotape.
WARNING: Unauthorized recordings of copyrighted
video tapes may be an infringement of copyright
laws.
– USER'S SET UP –
Connect this unit and a source (for playing) device
RENTAL [OFF]
REPEAT PLAY [OFF]
AUTO RETURN [ON]
B
as shown the following diagram.
[This unit]
REC/OTR
1
Insert a pre-recorded video cassette into the
source device (VCR, camcorder, etc.).
2
Insert a video cassette to record into this unit's
cassette compartment.
3
Press [SPEED] to select the
desired recording speed
(SP/SLP).
4
Press [SELECT] until "AUX"
appears on the screen.
5
Press [REC/OTR] on the unit.
6
Begin playback of the tape
in the source device.
NOTE:
• For best results during copying, use the control panel
whenever possible. The remote control might affect the
operation of the source device.
7
To stop copying, press [STOP/EJECT C A] on
the unit, then stop the playback on the source
device.
REW PLAY F.FWD STOP/EJECT HEADPHONE VIDEO AUDIO
L R
Audio/Video
cables
(not supplied)
[Ex: Jacks of
source device]
AUDIO
L
OUT IN
R
VIDEO
OUT IN
SP
AUX