Cleaning The Beacon - Federal Signal Spire 100 Beacon Manual De Instrucciones

Installation and Maintenance Instructions

Cleaning the Beacon

CRAZING/CRACKING Crazing (fine cracks) of lenses causes
reduced effectiveness of the light. Do not use cleaning agents
(which causes crazing) such as strong detergents, solvents,
or petroleum products. If crazing of the lens es does occur, the
reliability of light for emergency signaling purposes may be
reduced until the lenses are replaced.
CLEANING the POLYCARBONATE LENSES: To extend the life of
this device, periodic cleaning is necessary. Clean the lens with
a mild, non-abrasive, neutral-pH cleaning agent and a soft, clean
cloth. Rinse the device thoroughly to ensure that no cleaning
agent residue remains. To avoid water spots, dry the device with
a soft clean cloth. Failure to follow this precaution can cause
crazing or cracking of the lens/dome and voids the warranty
claims for the light.
100 Beacon
Spire
®
17
Federal Signal www.fedsig.com