Jotul F 360 Serie Manual Del Usuario página 17

Fig. 28
9. Place the small side burn plates (fig. 28 A) in the base plate's
groove under the side glasses.
10. Replace the top plate with the top grid and bowl.
11. Place the product data plate which is in the ash pan,
underneath the burn chamber.
4.5 Control of functions
When the product is set up, always check the control functions.
These shall move easily and function satisfactorily.
Jøtul F 360 Series are equipped with the following controls:
Fig. 29
Air vent fig. 29 A
Pushed in: Closed
Pulled out: Open
Ignition vent, fig. 29 B)
Pushed in: Closed
Pulled out: Open
Riddling grate (same handle as for the ignition vent) (Fig. 29 B)
Right handle is pushed in and out.
Handle for door fig. 29C:
Is opened by pulling handle out.
4.6 Use
• Open the air vent and the ignition vent by pulling it out all
the way (fig. 29 A & B). If necessary, keep the door slightly
open. (Use a glove, for example, as the handle can become hot.)
• Place two medium sized logs in/out on each side of the base.
N.B. In order to avoid sooting on the glass, it is important that
the log is not placed adjacent to the glass on the product.
• Crumple some newspaper (or birch bark) between these and
add some kindling wood in a criss-cross pattern on top and
light the newspaper.
ENGLISH
17