Device Description; Technical Data - Dreve Vacfomat V9 Instrucciones De Trabajo

Vacfomat V9

1. Device description

The Vacfomat V9 is a thermoforming
unit on the basis of vacuum technology,
which was especially designed for the
production of aligner splints. In just one
single operation, up to 9 aligners can
be thermoformed at the same time.
Very simple handling as well as con-
tinuous digital and acoustic control of
all working steps ensure problem-free
working, even with little prior knowl-
edge.
The Vacfomat V9 has been devel-
oped especially for Biolon foils with a
material thickness of 0.5–1.0 mm and,
thanks to its vertical forming as well as

2. Technical data

Dimensions (H x W x D):
Weight:
Mains voltage / input:
Max. power consumption:
Heating:
Device fuse:
Thermoforming capacity:
Forming:
Foil intake:
24 24
a very powerful vacuum pump, gen-
erates extremely precise final results.
The product was developed for use in
the dental sector and must be used
according to the user information.
For damage resulting from failure to
observe the instructions for use or from
improper use, the manufacturer will not
accept any liability. Moreover, the user
is obliged to check the product on their
own responsibility for its suitability and
possible use for the intended purposes
before using it, especially where these
purposes are not specified in the user
information.
415 x 487.6 x 600.7 mm
45 kg
220–240 V, 50 / 60 Hz
2000 W
medium infrared radiation
2 x 10 A
Up to 9 aligner models at the
same time
Vacuum pump
354 x 354 mm up to max. 1.0 mm
3. EC-Declaration of Conformit
According to Machinery Directive (2006/42/EG), Low Voltage Directive (2014/35/EU),
EMV Directive (2014/30/EU)
Herewith we declare that the machine described below in its conception and design and in
the shape delivered by us is in accordance with the fundamental requirements for safety and
health as prescribed in the applicable EC directives. In the case of any change or modification
of the machine, not authorised by us, this declaration becomes invalid.
Denomination of the machine: Vacfomat V9
D3282
Type of machine:
Thermoforming unit
Applicable EC directives:
2006/42/EG According to Machinery Directive
2014/35/EU Low Voltage Directive
2014/30/EU EMV Directive
Appllied harmonized standarts:
2006/42/EG According to Machinery Directive
EN ISO 12100:2010 + Safety of machinery – General principles for design – Risk assess-
Corrigendum to DIN EN ment and risk reduction (ISO 12100:2010); German Version EN ISO
ISO 12100:2011-03 12100:2010 + Corrigendum to DIN EN ISO 12100:2011-03.
2014/35/EU Low Voltage Directive
EN 60204-1:2006/A1: Safety of machinery – Electrical equipment of machines – Part 1: General
2009 + Corrigendum to requirements (IEC 60204-1:2005/A1:2008); German Version EN 60204-
EN 60204-1:2006 1:2006/A1:2009 + Corrigendum to EN 60204-1:2006; German Version
CENELEC-Cor.:2010 to EN 60204-1:2006.
EN 61010-1:2010 Safety requirements for electrical equipment for measurement, control
and laboratory use – Part 1: General requirements (IEC 61010-1:2010 +
Cor.:2011); German version EN 61010-1:2010.
2014/ 30/ EU EMV Directive
EN 61000-3-2:2014 Electromagnetic compatibility (EMC) – Part 3-2: Limits – Limits for
harmonic current emissions (equipment Input current <= 16 A per
phase) (IEC 61000-3-2:2014); German version EN 61000-3-2:2014.
EN 61000-3-3:2013 Electromagnetic compatibility (EMC) – Part 3-3: Limits – Limitation of
voltage changes, voltage fluctuations and flicker in public low-voltage
supply systems, for equipment with rated current <=16 A per phase and
not subject to conditional connection (IEC 61000-3-3:2013); German
version EN 61000-3-3:2013.
EN 61326-1:2013 Electromagnetic compatibility (EMC) – Part 3-3: Limits – Limitation of
voltage changes, voltage fluctuations and flicker in public low-voltage
supply systems, for equipment with rated current <=16 A per phase and
not subject to conditional connection (IEC 61000-3-3:2013); German
version EN 61000-3-3:2013.
Dreve Dentamid GmbH
Max-Planck-Straße 31 59423 Unna/Germany
•
www.dentamid.dreve.de
•
25 25