General Information; Care And Maintenance; Warranty; Liability For Defects - Dreve Vacfomat V9 Instrucciones De Trabajo

Máquina de termoformado de vacío para la tecnología de alineadores
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Vacfomat V9

11. General information

Repair and corrective maintenance
work at the Vacfomat V9 may only be
carried out by authorised experts.
The power supply to
the device must discon-
nected in any case.
Dreve will only be responsible for the
safety, reliability and performance of
the device if:
• the device is only used for the appro-
priate application purpose.

12. Care and maintenance

Before carrying out any
care and maintenance
work, the mains plug
must always be discon-
nected from the mains.
The thermoforming area of the device
should be checked on a daily basis
for contamination caused by mate-
rial residues. These residues, if any,
should be removed. Dirt may enter
36
36
• the operation is only carried out by
professionally trained personnel.
• the device is used in accordance with
these instructions for use.
• extensions, new settings, changes
or repairs are only performed by
authorised persons.
Since we are constantly working on the
further development of our products,
we cannot exclude the possibility of
technical changes.
the vacuum system and damage the
pump in the long term.
Ideally, the device should be cleaned
dry with a soft cloth and, if necessary,
with a slightly damp sponge and a
mild cleaning liquid.
Water and cleaning liquids must not
get into the device.

13. Warranty

The warranty period will be two (2)
cal or electrical influences which are
years from the date of delivery. War-
not provided in accordance with the
ranty claims will only be accepted in
contract.
case of material or fabrication defects.
Warranty claims will be excluded in the
The warranty claims do not refer to
case of changes or repair and main-
natural wear nor to any damage which
tenance work which have been incor-
result after the transfer of risk due to
rectly completed by the purchaser or
incorrect or unintended use, exces-
third parties as well as in the case of
sive loading, unsuitable equipment
the breaching of the seals.
and any such chemical, electrochemi-

14. Liability for defects

Claims for defects will lapse after a
Claims for defects will be excluded
period of one year from the date of
in the case of changes or repair and
delivery. The claims for defects do not
maintenance work which have been
refer to natural wear nor to any dam-
incorrectly completed by the purchaser
age which result after the transfer of
or third parties as well as in the case
risk due to incorrect or unintended use,
of the breaching of the seals.
excessive loading, unsuitable equip-
ment and any such chemical, electro-
chemical or electrical influences which
are not provided in accordance with
the contract.

15. Decommissioning of the product

The EU Directive 2002/96/EC concerning the reduction of the increasing
amount of electronic waste from electrical and electronic devices which
are no longer used. The objective is to avoid and reduce the increasing
amount of electrical and electronic waste and dispose of it in an environ-
mentally friendly manner. Devices labelled accordingly must not be dis-
posed of as household waste, but properly at municipal collection points,
your specialist dealer or the manufacturer.
37
37

Publicidad

Tabla de contenido
loading

Tabla de contenido