Indesit P 740 AS Instrucciones Para La Instalación Y Uso página 11

Congratualtions on choosing an Indesit appliance, which you will find is dependable and easy to use. We recommend
that you read this manual for best performance and to extend the life of your appliance. Thank you.
A
A. Gas Burners
B. Support Grid for Cookware
C. Control Knobs for Gas Burners and Electric Hot
Plate
D. Ignitor for Gas Burners (only on certain models)
E. Ignition Button for Gas Burners (only on certain
models)
The position of the corresponding gas burner or electric
hot plate (if present) is indicated on each control knob.
Gas Burners
The burners differ in size and power. Choose the most
appropriate one for the diameter of the cookware being
used.
The burner can be regulated with the corresonding control
knob by using one of the following settings:
• Off
High
Low
To turn on one of the burners, place a lighted match or
lighter near the burner, press the knob all the way in and
turn it anti-clockwise to the "High" setting.
On those models fitted with a safety device (F), the
knob must be pressed in for about 6 seconds until the
device that keeps the flame lit warms up.
On those models fitted with an ignitor (D), the "E"
ignition button, identified by the
be pressed and then the corresponding knob pushed
all the way in and turned anti-clockwise to the "High"
setting.
Close-up View
How To Use Your Appliance
symbol, must first
11
F. Safety Device (only on certain models) - Activates if
the flame accidentally goes out (spills, drafts, etc.),
interrupting the delivery of gas to the burner.
G. Electric Hot Plate (only on certain models)
H. Indicator Light for Electric Hot Plate (only on certain
models)
Some models are equipped with an ignition button
incorporated into the control knob. If this is the case, the
ignitor (D) is present, but not the "E" button.
To light a burner, simply press the corresponding knob
all the way in and then turn it anti-clockwise to the
"High" setting, keeping it pressed in until the burner
lights.
Caution: If the burner accidently goes out, turn off the
gas on the control knob and wait at least 1 minute before
you try to to light it again.
To turn off a burner, turn the knob clockwise until it stops
(it should be on the "•" setting).
Electric Hot Plate (only on certain models)
The hot plate can be: "normal" and "fast". The latter can
be identified by a red boss in the center of the hot plate
itself.
The hot plate can be regulated by tur ning the
corresponding knob in the clockwise or counter-clockwise
direction to any one of the 6 different settings:
0 Off
1 Low
2-5 Medium
6 High
The section entitled, "Practical Cooking Advise", provides
information on the recommended settings for various types
of food or cooking processes.
When the knob is on any of the settings other than "Off",
the "H" operating light comes on.