Bluetooth Interface Board - Citizen CT-S651II Manual De Usuario

3.3 Bluetooth Interface Boar d
Bluetoo th status LED
The LED on the Bluetooth interface board on the rear of the printer indicates the
status below.
Status
Detection
standby
(Discoverable)
Connection
standby
(Connectable)
iOS connection
Communicating
Error
Pairin g operati on
You need to perform the operations below the first time you establish a Bluetooth
connection for Bluetooth data communication.
A: Detect Bluetooth devices
B: Configure pairing settings
A: Detecting Bluetooth devices
Confirm that Bluetooth is enabled on the host PC before searching for Bluetooth
devices.
This product will show up as "CT-S651
when it is detected.
Select this product from among the detected devices.
Note: You can search for devices and change the names.
When memory switch MSW13-5 is set to "No Response" nothing is displayed by
device detection.
You can temporarily switch this setting to device detection (detect mode) by pushing
the switch on the Bluetooth interface board. Detect mode is exited when the
connection between the host PC is terminated.
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
Status LED
Descript ion
Standing by for
detection and
connection
Standing by for
connection
Data session unopened
iOS: data session
opened
Other OS: connection
established and
communication in
progress
Error or settings being
configured
V10 CONSUMIBLES S.L.
Switch
LED Status
Unlit
II _XX"(XX is last 2 digits of unique BD address.)
— 21 —