Citizen CT-S651II Manual De Usuario página 59

Switch no.
MSW10-4
MSW10-5
MSW10-6
MSW13-1
MSW13-5
MSW13-6
*1: If print data is very dense, the print head is hot, data transmission is slow, or some other conditions, the
motor and printing may occasionally stop which causes white stripes in the printout. To print high-
density data, set MSW2-3 (Spool Print) to ON to reduce striping, although this increases the time before
printing starts.
For a serial interface, increase the transmission speed to prevent the motor from stopping.
*2: The values for memory switches MSW7-X are only effective when DIP switch no. 1 is set to OFF .
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
Functio n Initial setting
Invalid
Old Command
Not by
Buzzer Event
C.Open
Tone 2
Buzzer Sound
Low/ All
Security/Target
Discoverable No Response, Discoverable
BT Device Scan
Valid
Auto Reconnect
V10 CONSUMIBLES S.L.
Setting value
Invalid, CBM1, CBM2
All Event/Error, Not by C.Open, Not by C.Open/PE
Tone 1, Tone 2, Tone 3, Tone 4
Low/All, Mid/All, Mid/Paired only, Hi/All, Hi/Paired
only
Invalid, Valid
— 55 —