Clearing A Cutter Lock (1); Clearing A Cutter Lock (2) - Citizen CT-S651II Manual De Usuario

4.2 Clearing a Cutter Lock (1)

The ERROR LED flashes and the auto cutter blade remains extended because a
foreign object or paper jam is obstructing it.
If the ERROR LED is flashing, clear the locked cutter as shown below.
1. Turn on the power.
2. Press up on the cover open butto n to open the paper cover.
3. Remove any jamme d paper includin g any scraps of paper. (Remo ve the pap er roll
that is loaded in the hold er also.)
4. Relo ad the pape r roll and close the paper cover.
CAUTION
 The print head is hot immediately after printing. Do not touch it.
 Do not touch the print head with bare hands or metal objects.
After doing the procedure in "Clearing a Cutter Lock (1)" and then opening the
paper cover, if the blade of the auto cutter is extended, do the procedure in

"Clearing a Cutter Lock (2)".

4.3 Clearing a Cutter Lock (2)
The paper cover is designed to be opened by pressing up on the cover open
button if the cutter locks. If the blade of the auto cutter still remains extended,
use the following procedure to clear the locked cutter.
1. Turn off the prin ter and unplug the power cord from the electric outlet.
2. Press up on the cover open butto n to open the paper cover.
3. While pressin g on the front cover release button with a pen or some thing , slide the
front cover about 10 mm upward.
4. Rotate the front cover forward in the direction of arrow A.
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
Refer to 4.3 Clearing a Cutter Lock (2)
— 41 —
V10 CONSUMIBLES S.L.