ProRestore Electro-Gen Manual Del Usuario página 10

Maintenance
Cleaning your Electro-Gen unit
After use as a sprayer
Clean and purge system by spraying water with a small amount of suitable
detergent through unit. Rinse system by spraying clear water through unit.
Wash solution reservoir with detergent and water solution, rinse with clear
water and wipe dry after each use. Remove the filter, thoroughly wash, rinse,
and replace filter.
Note: If the unit has been utilized to apply water based or volatile dry solvents, the
pump and atomizing mechanisms require lubrication. The mechanisms may
be lubricated by spraying a small amount of ODORx THERMO 55 through the
unit.
After use as a Thermal Fogger
ODORx THERMO 55 SERIES odor counteractants are compounded from the
finest base materials and constituents available. It is recommended to flush
the system (without the barrel) with mineral spirits to ensure optimal
perfromance.
Preserve and maintain full potency of the deodorant
It is recommended that un-used ODORx THERMO 55 be transferred from
formulation reservoir to original container.
Formulation reservoir maintenance
Remove screen filter, thoroughly clean, rinse, and replace filter. Wash
solution reservoir with a mild detergent and water solution, rinse with clear
water, and dry.
De-carbonizing barrel
Formulation residues may accumulate inside the barrel. It is advisable to clean
out the barrel with a rag or soft bristled brush periodically to remove
accumulations of foreign matter.
Storage
Storing unit in original container between uses prevents accumulation of dusts
and other soil.
10225901E 9 Legend Brands, Inc.