Simu T5 AUTOSHORT BHz Manual De Instrucciones página 6

2
Wiring
- You must have the possibility to switch off
individually each motor.
- Attach cables to prevent any contact with moving
parts.
- If the motor is used outdoors and if the power
supply cable is of the H05-VVF type, then run the
cable in a UV-resistant conduit, e.g. trunking.
3
Compatible transmitters
1 : 1 channel Wall BHz transmitter
2 : 1/5 channels Mobile BHz transmitter
i
Compatible with io-homecontrol
Location of the PROG key on BHz transmitters:
Do not position the transmitter near metal in order to avoid range losses.
4
Memorizing the automatic settings
If the installation includes several motors, only one motor is to be powered during this programming
procedure. It will avoid interferences with the other motor during the procedure.
4.1- Learning mode:
- Switch the motor ON.
- Simultaneously press the "UP" and "DOWN" buttons of a
BHz transmitter.
The motor will run for 0,5 second in one direction, then in the other.
i
The transmitter now controls the motor in unstable mode. Move to stage 4.2.
4.2- Checking the rotation direction:
a
>>
Press the "UP' key of the transmitter:
a. If the motorized tube runs in the UP direction, move to next stage 4.3.
b. If the motorized tube runs in the DOWN direction, reverse the rotation direction by pressing the "Stop" key
for at least 3 seconds. The motor will run for 0,5 second in one direction, then in the other direction. Move
to the stage 4.3.
4.3- Memorizing the automatic settings:
1
EN
2/4
transmitters;
®
OK 4.3
>> >>
b
1- Simultaneously press the "UP" and "DOWN" keys of a
2
transmitter. The motor will run for 0,5 second in one direction and
then in the other.
2s
2- Press the "Stop" key for 2 s. The motor will run for 0,5 second in
one direction and then in the other. The operation is completed.
Go to stage §5.
N
L
PE
(9 transmitters (1 channel) max. for one motor)
>> >>
T5 AUTOSHORT BHz
Blue
Brown
Green / Yellow
>>
ON
OK 4.3
>> >>