Trouble Shooting; Error Messages; Replacement Parts And Accessories - Adam Equipment DUNE Serie Manual De Usuario

EN

7.0 TROUBLE SHOOTING

7.1 ERROR MESSAGES

If an error message is shown, repeat the step that caused the message. If the error
message is still shown then contact your dealer for support.
ERROR DESCRIPTION
CODE
Overload
O-Ld
Out of Zero reading
OUt2
Unstable
UnSt
Low Battery indicator
LO or
E-Prom error
ErrE
No Power when turning on
7.2

REPLACEMENT PARTS AND ACCESSORIES

If you need to order any spare parts and accessories, contact your supplier or Adam
Equipment. A partial list of the more common items follows:
© Adam Equipment Company 2016
Part Number
9402
9401
7
POSSIBLE CAUSES
Remove weight from the pan. Make
sure the machine is reading zero
before weighing. Do not over load
the pan. If the problem recurs
calibrate. Possible damage to the
internal weighing cell.
Make sure the pan is fitted correctly.
Make sure nothing is touching the
pan when turning on the unit.
Calibrate
damage to the internal weighing cell.
Make sure the balance is on a flat
surface and away from vibration.
Possible damage to the internal
weighing cell.
Change the batteries or use on the
power adapter.
Software error turn off and restart.
Contact Adam Equipment or your
dealer for further assistance.
Change the batteries or use on the
power adapter.
Description
DC adapter
(Country Dependent)
Plastic pan
9384RevB3-Mar16
the machine. Possible