Operation - Gram RZ Serie Manual De Utilización

Note: If you need to change the value, do as the following: Press key
value setting. Press key
to modify the value (or via numeric keys). Press key
4. Put the corresponding weight on the weighing pan, and then press
first point calibration.
Note: After the first point calibration, the window can display the weight value. If no need for
the other point calibration, press the
5. Add another weight 500g to the current weight. The window will show the
total weights value, press the
Repeat this step to complete the calibrations of on3, on4 and on5.
6. Press to save. After the window displays "
mode.
Note: the window displays
return to the normal weighing.

OPERATION

Weighing
Put item to be weighed on the scale. The Weight window shows the weight.
Tare
When weighing a sample that must be held in a container, tare and store the container
weight into memory.
1) Under the weighing mode, put the container on the scale.
Press the key
The symbol appears and the window displays as shown on the right
2） Put the item into the container, then the window displays the net weight.
3） Clear the pan. The window displays the taring weight, that is the weight of container.
4) To cancel tare action, clear the pan and press
or to move leftwards or rightwards. Press key
key to complete
automatically when on5 is finished. It will be saved and
to complete tare action.
to save.
to save and exit from calibration mode.
", It will return to normal weighing
or
to enter the
to complete the
keys
or
12