Gram RZ Serie Manual De Utilización página 14

Note: the item on the weighing pan should be more than or equal to 20e.
When changing the Hi-Lo value, the scale will activate the weighing checking function
automatically. If the Lo value is higher than Hi value, then the Hi value will become the same
value as Lo data.
Basic counting pieces
1) Under the weighing mode, press the key to select the unit "PCS"
.
2) Long press the key, the ex-factory default sample quantity (10pcs) is displayed.
3) Use the and keys to choose the sampling amount. Available options are: 10,
20, 50, 100, 200, 500, 1000 (pieces)
4) Put the corresponding samples on the weighing pan and then press the key. The
message is displayed momentarily before the display reverts to the sample quantity.
5) Remove the samples and put the load on, the scale calculates the amount of the load.
6) To go back to the normal weighing mode, remove the load and press the key to
select the proper unit weight.
Accumulation
1) Under the weighing mode, put the item on the weighing pan. Press the key, the
display will show momentarily the message "Add01".
2) Remove the item and the display goes back to zero before the next accumulation can
register. (The maximum is 99 pieces, display the lastest 10 accumulation events in details)
Accumulation display
1) Press key to displays the total accumulation data.
2) Press key or to check the total accumulation and each accumulation in detail.
The number of accumulated weight is showed at the left bottom.
Note： XX=total accumulation events； XX=the single accumulation
Accumulation clear
To clear the total accumulation data or the first 10 accumulation events, press key to
display the accumulation data needed and then press the key to clear data chosen.
" " will disappear and back
When clear total accumulation data, the accumulation signal
14