In-Wall/On-Wall Installed Version; In-Wall Installation - BKS B-55600-20-1-8 Manual De Instrucciones Y De Montaje

4.

In-wall/on-wall installed version

4.1

In-wall installation

Flush boxes are used for the installation. We
recommend an installation height of between
1.2 and 1.4 m above finished floor level.
„ „ Fasten the supporting frame to the flush
box.
„ „
Plug the plastic spacer frame into the
supporting frame.
„ „
Position the stainless steel outer frame on
the spacer frame.
„ „ Establish the electrical connection with
the module and test the function.
„ „ Finally, clip the module into the retaining
tabs provided.
„ „ Caution: once the module has been
clipped into the supporting frame it is
difficult to remove. It may be damaged
when it is removed.
57