Flash - CONCORD Eye-Q Go LCD Manual De Usuario

FLASH

This feature enables the camera to override the flash mode that is set by
the Slide Switch.
In the flash mode, there are 3 flash options: Auto ( A ), Flash (
Flash Off ( ).
Flash Option
Auto ( A )
Flash ( )
Flash Off ( )
1. In the FLASH menu, press
Flash ( ), and Flash Off (
2. Press OK to select the flash mode and press MENU to exit.
3. Position the subject in the camera.
4. Take the image.
5. The flash mode will return to the default setting on the Slide Switch.
Note: The selected option will be marked by (
Note: The flash may need time to recharge between photos. While it is
charging the Camera Ready LED blinks. When it stops blinking the
camera is ready to take another image. If the batteries are low, the
flash will not work. Please insert fresh batteries.
Distance from
subject
8.5ft (2.5m) and Use this option in variable lighting
3.9ft (1.2m).
8.5ft (2.5m) and Use this option in backlight or low light
3.9ft (1.2m).
3.9ft (1.2m) to
infinity
Lighting Condition
conditions. The camera will automatically
detect when the flash is needed.
conditions. The flash will work in bright
and dark conditions.
Use this option in outdoor or bright
light conditions.
or to choose between Auto ( A ),
).
•
21
).
) or