Horizon Global 76190 Instrucciones De Instalación página 5

4. Hitch installation - raise the hitch into position again and align bracket holes to the studs on end panel. Raise bumper beam to sandwich the hitch. Reuse flange nuts from bumper, bolts from exhaust hanger
bracket and loosely secure other fasteners to the hitch, see Figure 1,
©2017 Horizon Global™ Corp. - Printed in Mexico
3. Heat shield trimming – trim the area on the heat shield as shown in Figure 4. Reinstall the heat
shield back to the frame rails.
4.5''
12''
3''
4.5''
12''
4''
Sheet 5 of 18 76190NP 10-10-17 Rev. B