Sanus Systems PFFP2 Manual De Instrucciones página 9

Step 8: Mounting Monitor Brackets to a television with a curved back or an obstruction near the threaded insert
First, determine the diameter of the Bolt (cc,dd,ee,ff) your TV requires by hand threading them into the threaded insert on the back of
the TV. If you encounter any resistance stop immediately! Once you have determined the correct diameter, see the appropriate Diagram
below. You will thread the Bolt through the appropriate Lock Washer (gg,hh,ii,jj), a Washer (kk,ll), the Monitor Bracket (e,f), a Spacer
(mm,nn) and finally into the TV. Make sure the Monitor Brackets are vertically centered and level with each other. See the appropriate
Diagram below.
M4 Diameter Bolt
kk
mm
M5 Diameter Bolt
kk
mm
cc
gg
kk
f
Diagram 8
dd
hh
kk
f
M6 Diameter Bolt
ll
e
nn
M8 Diameter Bolt
ll
e
nn
ee
ii
ff
jj