Publicidad
Idiomas disponibles
Idiomas disponibles
Operations: Hard Floor Cleaning
This deep cleaner is also designed to clean hard floors when using the Bare
Floor Tool from BISSELL. A Bare Floor Tool and Hard Floor Solutions formula is
available for purchase from BISSELL.com or BISSELL Consumer Services. The
hard floor tool provides effective cleaning for linoleum, vinyl, and tile floors.
Caution: Do not use on unsealed hardwood floors.
NOTE: Prior to filling with formula, be sure any carpet cleaning formula that may have
been previously used is thoroughly rinsed from the 2-in-1 tank. Thoroughly vacuum or
sweep floor to pick up any debris before using your deep cleaner.
1
4
Make sure the machine is
off and unplugged from the
grounded outlet.
7
Fill BISSELL
2X Hard Floor
Solutions
formula to the
indicated fill line
in the built-in
measuring cup
of the tank lid.
Once measured,
pour into the
bladder.
Attach the
bare floor
tool to the
bottom of the
machine: hook
the tool into
the nozzle and
swing it down
until it clicks
into place.
2
Fill with clean hot tap
water (140°F/60°C MAX).
Do not boil or heat the
tank in the microwave.
5
Be sure the ReadyTools
dial is set to Floor
Cleaning.
While pressing the spray trigger make one slow
wet pass forward and back.
Repeat the motion with the trigger released, using
the tool to squeegee and suction up the dirty
water.
When finished, remove the tool and let it dry
before storing. Refer to the Maintenance section
on page 13 for machine clean up and storage tips.
3
Return the lid to
the tank and return
the tank to the
machine.
6
Plug the Power Cord
into a grounded
outlet and press the
Power Switch Pedal.
www.BISSELL.com
11
Publicidad
