Assembly - Bissell PROHEAT 1846 Serie Guia Del Usuario

Assembly

WARNING
Do not plug in your deep cleaner until you are familiar with all instructions
and operating procedures.
Your deep cleaner comes in four
easy-to-assemble components and
an accessory bag.
- Upper Handle
- Base
- Upper Hose Wrap
- Lower Hose Wrap
1
1
Slide handle assembly onto lower body
and secure with two long screws.
3
1
Attach lower hose rack by sliding it in place on the lower
body assembly and securing it with 2 short screws.
Attach Tough Stain tool to end of hose.
6
www.BISSELL.com
The only tool you will need to assemble
your deep cleaner is a Phillips screwdriver.
2
2
Attach upper hose rack to back of upper
handle by pushing into open slots and
sliding down until it snaps into place.
3
2
4
Wrap flex hose around
hose rack and secure
it into notched out
holder as shown.