Mopar ADDENDUM K6861439 Manual Del Usuario página 12

300 PROCEDURE STEPS:
1. Disconnect the negative battery cable.
2. Using a trim stick, pry the switch­bank panel (1) away
from the instrument panel, and release the clips that
secure the switch­bank to the instrument panel.
CAUTION: Push the 40 way connector in before push­
ing on the locking clip. Failure to follow these instruc­
tions will damage or break the connector locking clip.
NOTE: In the event that the locking tab breaks or is
broken, do not replace the harness. The connector
will still lock and the harness will still function as de­
signed.
CAUTION: Never pull the connector out by the wires.
Failure to follow these instructions will damage or
break the wires and/or connector.
3. Push in on the 40 ­ way connector (1).
Jan 02, 2012
11
K6861439