16
30. Install the center bezel (1) onto the instrument panel
(2) and carefully push on the outside edges of the cen
ter bezel to fully seat the snap clip retainers into the
instrument panel.
31. Position the new Telematics Gateway Module (TGM)
close to the instrument panel to connect the electrical
connectors.
32. Connect the antennas (1), RF HUB and UCI cables
(4), video cable (3) and wiring connectors (2) to the
TGM.
33. Install the telematics gateway assembly (1) and se
cure with the fasteners.
Jan 02, 2012
K6861439