12
4. Gently push down on the connector release lock (1).
5. Using a pocket screw driver or Trim Stick C4755 (1),
gently pry on one side of the connector (2).
6. Using a pocket screw driver or Trim Stick C4755 (1),
gently pry on the other side of the connector (2).
7. Use Step #5 and Step #6 until the connector is out far
enough to grab the connectors with your fingers and
separate the connector from the device.
8. Disconnect the 40Way connector (2) from the back
of the switchbank assembly and remove the switch
bank assembly.
Jan 02, 2012
K6861439