6. Gently push down on the connector release lock (1).
7. Using a pocket screw driver or Trim Stick C4755 (1),
gently pry on one side of the connector (2).
8. Using a pocket screw driver or Trim Stick C4755 (1),
gently pry on the other side of the connector (2).
9. Use Step #7 and Step #8 until the connector is out
far enough to grab the connectors with your fingers
and separate the connector from the instrument clus
ter bezel.
10. Remove the instrument cluster bezel from the vehicle.
Jan 02, 2012
3
K6861439