Care Instructions
Æ Clean the housing surfaces with a soft, fluff-free cloth.
Æ Clean the sensors after each use.
Æ Clean the magnetic head, UV lamp tube and UV
sensor using a soft cloth moistened with isopropyl alcohol.
Æ Do not use any cleaning agents or solvents.
Self-diagnosis
Display
The left-hand counting sensor is soiled or
E1
The right-hand counting sensor is soiled or
E2
E3
The UV lamp tube is defective or the UV sen
E4
The sensor in the infeed tray is soiled or
E5
The sensor in the output tray is soiled or
E6
Error Table
Display
EC
EH
EJ
Ed
dd
CF-1
CF-2
CF-3
CF-4
CF-5
CF-6
16
Cause
damaged.
damaged.
The magnetic head is defective.
sor is damaged.
damaged.
damaged.
Test Function
Stuck together
Half bank notes
Jammed bank notes
Double bank notes / Density
Width of bank note
Ultraviolet test
Magnetic ink test
Incorrect bank note when sorting
Infrared test
Length of bank note
Imprint on bank note
Clean or change the sensor.
Clean or change the sensor.
Change the magnetic head.
Change the UV lamp tube or UV sensor.
Clean or change the sensor.
Clean or change the sensor.
G
Solution
Sensor Indication
(Always active)
(Always active)
-
DEN
DD
UV
MG
-
IR
3D
CIS