Publicidad
DNP Port 1 Port 2 and Port 3 Configuration
Number of Zeros
Number of zeros before the message.
Max Retries
Number of retries of the Physical Layer after collision detection.
Min Retry Time
Minimum time to retry of the Physical Layer after collision detection.
Max Retry Time
Maximum time to retry of the Physical Layer after collision detection.
Collision Type
Port 1:
NO
based on detection of transmitted data (monitoring all data transmitted on the
ECHO
link).
Port 2:
NO
based on detection of transmitted data (monitoring all data transmitted on the
ECHO
link.
DCD (Data Carrier Detect )
If the device prepares to transmit and finds the link busy, it waits until is no longer busy,
and then waits a backoff_time as follows:
backoff_time = Min Retry Time + random(Max Retry Time - Max Retry Time )
and transmit. If the device has a collision in transmission the device tries again ,up to a
configurable number of retries (
Wait N Bytes 485
Number of wait bytes between Reception and transmission Use Port 2 Operate Mode RS-
485
.
Atención
© ZIV Aplicaciones y Tecnología, S.A. Zamudio 2004
Este documento contiene información confidencial propiedad de ZIV S.A. Cualquier forma de reproducción o
divulgación está absolutamente prohibida y puede ser causa de severas medidas legales.
DNP 3.0 : Device Profiles Document
(Advice Time) :
(N1 Retries) :
(Fixed_delay) :
:
:
based on detecting out-of-band carrier.
Max Retries
:
61 of 84
Page
) if has news collision.
Publicidad
Capítulos
