KTM 64112955044 Instrucciones De Instalación página 13

Fork rework
- Mount fork legs (see Repair Manual).
- Install front fender (see repair manual).
- Attach sticker (included) visibly on a fork.
Without the KBA sticker the low chassis kit is not authorized
for operation on roads.
Shock absorber
- Remove the shock absorber (see the repair manual).
- Remove spring (see the repair manual).
Mounting the shock absorber
- Clamp mounting part .
NOTE
Use soft jaws.
- Loosen lock nut .
- Unclamp the shock absorber.
- Clamp shock absorber vertically.
Clamping block T508S
- Heat mounting part if required (50 °C), twist off and remove.
- Unclamp the shock absorber.
- Remove lock nut .
- Remove spacer ring .
NOTE
Spacer ring is not reused.
- Mount spacer disk (included).
- Mount lock nut all the way up to the stop.
- Clamp shock absorber vertically.
Clamping block T508S
- Secure thread with Loctite 2701.
- Mount mounting part (included) and tighten to 75 Nm.
- Unclamp the shock absorber.
13