Piece Counter Function; Percentage Function - Baxtran ADA Serie Manual De Instrucciones

8. PIECE COUNTER FUNCTION

Symbol on the display: PCS
PROCEDURE
1- Place the container on the weighing pan.
2- Press the
3- Select the number of pieces to be used for reference, press the
next, press the
the more accurate the results.
4- Place the selected number of pieces on the pan or inside the container.
5- Press the
6- Load the pieces that remain to be counted, and the display will show the total number of pieces, e.g.: 258 pieces.
7- To print the results, press
8- To return to the normal weighing mode, press

9. PERCENTAGE FUNCTION

Symbol on the display: %
PROCEDURE
1- Press the
2- Place the reference weight on the pan. When the reading is stable, press
or "100.00", which refers to the 100% accuracy of the scale. The % indicator will appear on the display.
3- Remove the reference weight, and the display will show "0.000" or "0.00".
4- Place the object to be weighed on the weighing pan.
5- Wait until the OK indicator appears on the display; the display reading indicates the deviation from the reference weight
as a percentage.
6- Press the
To obtain the percentage of a product in a container, perform the following procedure:
1. Place the empty container on the weighing pan and press
2. Pour the reference weight into the container.
3. Press the
4. Remove the container with the reference weight. Place another container on the pan and press the
its weight, then wait until the display reading is stable, at which point the display will show "0.000" or "0.00".
5. Pour the product into the container; the displayed value is the difference in percentage between the product and the refer-
ence weight.
6. Press the
7. If desired, the result can be sent to a printer.
44
key
key to display the available numbers of pieces (10, 25, 50, 100). The greater the number of pieces,
key, and the display will show the number of pieces used for reference, e.g.: 10
key
key, and the scale will return to the normal weighing mode.
key once the reading is stable, and the display will show "100,000" or "100.00".
key to return to the normal weighing mode.
USER'S MANUAL ADA-APD
pieces key, and the display will show "qTy10";
, and the PCS symbol will disappear.
and the display will show "100,000"
key to subtract
EN EN