Parameter Setting; Parameter Configuration - Baxtran ADA Serie Manual De Instrucciones

11. PARAMETER SETTING

To enter the configuration mode, press the
1. Press the
2. If you want to exit the configuration mode at any time, press the
press the
Print
bAud
UnITS
key to select the desired parameter and press the
key to confirm.
STABLE transmission when the weight is stable
InSTAN instant data transmission
InTER print interval
LInEFd interline output
ESC leave
300/600
1200/2400
4800/9600
ESC leave
EnABLE
ESC leave
key.
key repeatedly until the display shows "ESC",
0 SEC: continuous transmission
2 SEC: transmission every 2 seconds
.....
ESC: leave
LF 0: output each line
LF 1: output every 2 lines
.....
ESC: leave
PAITy
g yES: Unit g activated
Or yES: Unit ounces
activated
CYES: Carat units
activated
dwt yES: Penny unit
activated
USER'S MANUAL ADA-APD
key to confirm.
NOn: no parity control
Odd:Odd parity control
EVEn: even parity control
ESC: leave
g nO: Unit g deactivated
ESC: leave
O n0: Ounce unit off
ESC: leave
C n0: Carat unit deactivated
ESC: leave
dwt n0: Penny unit deactivated
ESC: leave
EN EN
47