Important Information; Identification Of Parts; Date Of Manufacture; Assembling Your Stroller - Evenflo Folio Manual Del Usuario

IMPORTANT INFORMATION

Child Requirements Only use the stroller in the upright position with a child who is capable of sitting upright unassisted.
Maximum weight: 50 lbs (22.6 kg)
Maximum height: 38 inches (96 cm)
IMPORTANT: Read instructions carefully before use. Save these instructions for future reference. It is very important to assemble
the stroller according to these instructions. DO NOT USE YOUR STROLLER UNTIL YOU HAVE READ AND UNDERSTOOD
THESE INSTRUCTIONS.
If you are missing parts, do not use stroller and call Evenflo ParentLink at 1-800-233-5921 (U.S.A.), 1-937-773-3971
(Canada), or 01-800-706-12-00 (Mexico) to order replacement parts.
Registration Information
Please register this product so we can reach you if there is a safety alert or recall. We will not sell, rent, or share your personal
information. To register your product, please complete and mail the card that came with it or visit our online registration at
www.evenflo.com/registerproduct.
For future reference, record the Model Number and Date of Manufacture below. You can find this
information on one of the rear stroller legs.
Model Number:

IDENTIFICATION OF PARTS

(2) Front Wheel Assembly
Frame
2

Date of Manufacture:

(2) Rear Wheel Child Tray
Cupholder
1
B
A
Unlatch side frame lock
To lock the stroller in the open position, palms must be put under the
parent's handle to give an upward force away from your body. Pull upward
until the stroller opens fully with an audible click.
Make sure the stroller locks in the open position by pushing down on the
parent's handle.
2
CLICK!

ASSEMBLING YOUR STROLLER

WARNING
Care must be taken when folding or unfolding stroller to
prevent finger injury to you or your child in hinge areas.
To protect flooring, place a protective covering (cardboard,
towel, small rug or blanket) beneath the stroller during
assembly.
, and lift up on the parent's handle
A
B
Turn the stroller upside down, as shown, so the rear of the
stroller is facing upwards.
To attach rear wheels, push wheel onto rear leg tube until it clicks
into place. Repeat on other side.
Pull on wheels to make sure both of them are securely attached.
To remove, push metal button
and pull wheel off stroller.
C
.
B
CLICK!
C
3