Festo SFC−-LA Instrucciones Breves página 25

Menu
command
Position set
Jog Mode
Password edit
1)
HMI control
LCD adjustment
1)
Password protection possible
2)
The controller interface must be deactivated, see [HMI control]:HMI=on
3)
Teach mode
4)
Only after successful reference travel
Festo P.BE−K−SFC−LAC−IO 0604NH English
Description
Position nr Number of the position set (1...31)
Pos set mode Mode: absolute or relative positioning
3) 4)
Position Target position
Velocity Positioning speed
Acceleration Acceleration and deceleration
Jerk Back
Work load Work load
SAVE... Save parameters in EEPROM
Move drive by means of arrow buttons (also possible without
previous reference travel; software end positions are without
function).
Setting up a password for the control panel
Setting the device control via the control panel
Rotate the display in steps of 180°
25