For Awekas; Setup Wi-Fi Connection; Step For Enter The Setup Interface - Bresser 7003500 Manual De Instrucciones

5. In the setup UI that mention in section 7.2, select the weathercloud in first or second row of the Weather
server setup section then key-in the Station ID and key that assigned by weathercloud.

6.4 FOR AWEKAS

1. You have the possibility to use a weather service of a third party provider, as shown here with the
example of AWEKAS.
2. Enter the following web address in the address bar of the web browser for the 'AWEKAS' service:
https://join.awekas.at
3. Fill in all the necessary information.
4. Make a note of the information: Username, Password, Geographic latitude (Latitude) in decimal
degrees (e.g. 48.30591), geographical longitude in decimal degrees (e.g. 14.2862).
5. NOTICE! Use a valid e-mail address for registration. Otherwise the service can not be used.
6. Detailed instructions for setting up AWEKAS are also available for download:
http://www.bresser.de/download/7003500
7. Enter the AWEKAS Server Information on the Setup page as follows:

7. SETUP WI-FI CONNECTION

7.1 STEP FOR ENTER THE SETUP INTERFACE

1. To activate AP mode, press
2. Press / key to enter OTHER SETTING SECTION
3. Press key to enter the sub menu
4. Press / key to select ENABLE ACCESS POINT (AP mode), then press
5. Use the smart phone, tablet, or computer to connect the console through WI-FI.
6. In PC / Mac choose WI-FI network settings or In Android / iOS choose setting
console's SSID: PWS-XXXXXX in the list and it will need several second to connect.
PWS-XXXXXX
PC (Windows 10) WI-FI network interface
7. Once connected, enter the following IP address into your Internet browser's address bar, to access the
setup interface of the console: http://192.168.1.1
URL:
Station ID:
Station key:
key to enter the MENU SETTING SCREEN. (SECTION 4.9.8)
Enter the server URL: http://ws.awekas.at
Enter username
Enter password
PWS-XXXXXX
Android WI-FI network interface
88
key to start the AP mode
WI-FI to select the