KTM Power Parts 69012034044 Manual Del Usuario página 10

5 4
9
8
7
10
1 6 2
10
Scope of delivery:
(1) Hexagonal collar screw, M6x25 (2x)
(2) Hexagonal collar screw, M6x20 (2x)
(3) Insert nuts (8x)
(4) Bush (2x)
(5) Retaining bracket control unit (1x)
(6) Retaining bracket voltage regulator (1x)
(7) Cable binder (5x)
Preparations
Lean the motorcycle on the side stand.
NOTE:
We recommend that you use a rear wheel lifting device as supplied by KTM
(610.29.055.400) with the Universal V-Adapter (610.29.055.120).
Remove the radiator covers (7) on the left and right.
Remove the upper front covers (8) on the left and right.
Remove the lower front covers (9) on the left and right.
Remove the exhaust air duct (10) on the left and right.
Mounting the racing electronics
NOTE:
The racing electronics can be used only in combination with the optionally
available racing covers!
The engine must be cold! Otherwise, there is acute risk of scalding by the
coolant!
Remove the radiator cap.
Remove the fixing screw for the intake snorkel on the right.
Remove the intake snorkel on the right.
0024060206
0024060256
54603055051
54613038150
44011076305