Du Pont WFRO60X-1 Serie Instrucciones De Instalación página 8

STEP 5
Install RO Faucet (continued)
INSTALL REVERSE OSMOSIS FAUCET
1
Locate and organize your RO Faucet install parts. See packing list on page 1.
2
Attach S to RO Faucet Body.
3
Route the 3 tubes R, S, T, attached to the RO Faucet Body P through the RO Faucet Base Q, but don't connect the RO
Faucet Body P to the RO Faucet Base Q yet. Then route the 3 tubes R, S, T, through the hole in the sink until 12" of
tubing remains above the sink. Lay RO Faucet Body P on the counter top.
4
Mount Faucet Body P to the sink hole by pushing the toggle bolts through the hole until the RO Faucet Body P is flat
against the sink surface. Position the toggle bolts to catch under the lower surface of the sink or counter, but ensure that
they will not obstruct the faucet stem from sitting in place. Loosely tighten the toggle bolts until the RO Faucet Base Q is
mounted loosely to the surface.
TIP: Make sure to keep the "wings" of the toggle bolts free to allow all tubing and faucet stem room.
TIP: Install the faucet base with the bolts at 5 & 11 o'clock positions to have the handle positioned at 90 degrees to
the right.
5
Hold the RO Faucet Base Q firmly and mount the RO Faucet Body P to the RO Faucet Base Q by turning 1/4 clockwise to
lock. Ensure the RO Faucet Body Handle is positioned to your liking.
TIP: If there is not enough clearance for the tubing and the stem, the toggle wings may need to be
adjusted to create more clearance.
6
Turn the RO Faucet Body P 1/4 turn counter-clockwise and remove the faucet enough to tighten the RO Faucet Base Q
toggle bolt screws firmly. Do not over-tighten.
7
Mount the RO Faucet Body P to the RO Faucet Base Q and turn 1/4 turn clockwise until it locks.
8
Mount the RO Faucet Spout O to the RO Faucet Body P by screwing spout nut to body.
WFRO60X-1
5
8
O
Q
P
R
S
T
V4.5E