Fuse Replacement - Honda CRF230F Manual Del Propietário

CRF230F • CRF230F (U Type)
Removal
The battery is in the battery compartment behind the
left side cover.
1. Make sure the ignition switch is OFF.
2. Remove the left side cover (page 33).
3. Remove the battery holder (1).
4. Disconnect the negative (–) terminal lead (2) from
the battery first, then disconnect the positive (+)
terminal lead (3).
5. Pull out the battery (4) from the battery box.
Installation
1. Reinstall in the reverse order of removal. Be sure
to connect the positive (+) terminal first, then the
negative (–) terminal.
2. Check all bolts and other fasteners are secure.
(2)
(1)
(4)
(1) Battery holder
(2) Negative (–)
terminal lead
(3)
(3) Positive (+)
terminal lead
(4) Battery

Fuse Replacement

(Refer to the Safety Precautions on page 42.)
When frequent fuse failure occurs, it usually indicates
a short circuit or an overload in the electrical system.
See your Honda dealer for repair.
NOTICE
Never use a fuse with a different rating from that
specified. Serious damage to the electrical system or
a fire may result, causing a dangerous loss of lights
or engine power.
Blown fuse
69
(Cont.)