Technical Data - Hansgrohe Metropol S 14461 Serie Instrucciones De Montaje

Assembly
Attention! The fitting must be installed, flushed and
tested after the valid norms.
1. Flush through the supply pipes.
2. Mount the S - unions and align them.
3. Fasten the mixer with the washers.
The hot and cold water supply's should be of equal
pressures.
Operation
The mixer is activated by lifting the lever handle.
Move to the left = hot water,
move to the right = cold water.
14461000: The flow is changed from bath to shower
function by pulling the knop at the upper side of the
spout. After shutting off the water flow, the mixer
returns automatically to the bath function.

Technical Data

Operating pressure:
Recommended operating pressure: 1 - 5 bars
Test pressure:
Hot water temperature:
Recommended hot water temp.: 65° C
Centre distance:
Connections G 1⁄2":
Rate of flow by 3 bars:
Back flow and vacuum breaker
Fault
Insufficient water
Mixer stiff
Mixer dripping
Hot water temperature too low
Instantaneous heater didn't work - Flow limiter in handshower isn't
6
English
max. 10 bars
16 bar
max. 80° C
150 ± 16 mm
cold right - hot left
approx. 22 l/min
Cause
- Shower filter seal dirty
- Non return valve hasn't moved
back
- Cartridge defective, calcified
- Cartridge defective
- Hot water limiter incorrectly set
removed
- Filter are dirty
- Non return valve didn't move
back
To adjust the hot water limiter on single lever mixers,
please see page 13.
No adjustment is necessary when using a continuous
flow water heater.
Hansgrohe single lever mixers can be used toge-
ther with hydraulically and thermically controlled
continuous flow heaters if the flow pressure is at
least 1.5 bars.
Attention!
The non return valves must be checked regularly ac-
cording to DIN EN 1717 in accordance with national
or regional regulations (at least once a year).
Spare parts (see page 3)
1 handle
1.1 screw cover
2 flange
3 nut
4 cartridge cpl.
5 flange
6 S-unions
7 aerator cpl.
8 selector assy
9 diverter knob
10 non return valve
XXX = Colors
000 = chrome plated
880 = satin chrome
Remedy
- Clean filter seal between shower
and hose
- Exchange non return valves
- Exchange cartridge
- Exchange cartridge
- Set hot water limiter
- Remove flow limiter
- Clean the filter / exchange filter
- Exchange non return valves
14895XXX
96338000
97406XXX
97209000
92730000
96467XXX
94140000
13914000
94077000
96466XXX
94074000