Handling And Installation; Recommendations For Handling And Installation; Packaging And Unpacking; Transport - Angelo Po 0N0GRE Manual De Uso

HANDLING AND INSTALLATION

RECOMMENDATIONS FOR HANDLING AND INSTALLATION

Important
All handling and installation operations
should be carried out in accordance with cur-
rent legislation on health and safety at work.
The packaging is designed to reduce space and
as appropriate to the type of transport used.To
simplify transport, some components may be
removed and suitably protected and packed for

transport.

The packaging carries all information necessary
for loading and unloading.
When unpacking, check that all components are
present in the correct quantities and are unda-
maged.
The packaging material must be properly dispo-
sed of in accordance with legal requirements.
Diff erent means of transport may be used, de-
pending partly on the destination.
The chart shows the most commonly used alter-
natives. During transport, fi x the packaging to
the means of transport securely to prevent un-
desirable shifting.
The appliance can be handled using fork-lift or
hook equipment of suitable load-carrying capa-
city. Before lifting, check the position of the lo-
ad's centre of gravity.
Important
When engaging with the lifting equipment,
watch out for the intake and outlet pipes.
3301460_inst_GB_rev.2
If necessary, the person authorised to carry
out these operations must organise a "safety
plan" to protect the people directly involved.

PACKAGING AND UNPACKING

TRANSPORT

HANDLING AND LIFTING

- 7 -
Lifting equipment
Means of transport
ENGLISH
GB